Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Orlando?
Metal roof installation in Orlando, FL typically runs between $14,500 and $38,000 for an average 1,800-square-foot single-family home in 2026, with most homeowners landing in the $22,000 to $28,000 range. That works out to roughly $8 to $16 per square foot for standing seam, and $5 to $10 per square foot for exposed-fastener metal panels. The spread is wide because roof complexity, metal type, and whether you’re tearing off the old roof all move the final number.
These figures come from pricing we see in our own estimates across Orlando neighborhoods like Lake Nona, College Park, Baldwin Park, and Dr. Phillips, where Mercer Roofing has installed metal roofs for more than two decades. Metal roofing costs more upfront than asphalt shingles, but the numbers shift over time, which we’ll walk through below. If you want a precise number for your house, call (850) 757-3564 and we’ll give you a written price before any work starts.
Key Takeaways: Metal Roof Pricing in Orlando
- Average total cost: $22,000 to $28,000 for a typical 1,800 sq ft Orlando home
- Cost per square foot: $8 to $16 installed, depending on panel type
- Standing seam: $12 to $16 per sq ft; exposed-fastener: $5 to $10 per sq ft
- Teardown of existing roof: adds $1.50 to $3 per sq ft
- Timeframe: 3 to 7 days for most Orlando homes
- Biggest cost drivers: roof pitch, panel gauge, insulation, and underlayment quality
Metal Roof Installation Cost Breakdown (2026)
Here’s a line-item breakdown of what goes into a metal roof installation in Orlando. These are real ranges from estimates we’ve written in Orlando proper and the surrounding areas we serve, including Winter Park, Oviedo, and Kissimmee:
| Line Item | Cost Range (1,800 sq ft roof) | Notes |
|---|---|---|
| Metal panels (standing seam, 26-gauge Galvalume) | $10,800 to $18,000 | $6 to $10 per sq ft for materials alone |
| Metal panels (exposed-fastener, 29-gauge) | $5,400 to $9,000 | $3 to $5 per sq ft for materials |
| Underlayment (synthetic, high-temp rated) | $900 to $1,800 | $0.50 to $1 per sq ft; critical for Florida humidity |
| Old roof teardown and disposal | $2,700 to $5,400 | $1.50 to $3 per sq ft; includes dumpster fees |
| Decking repair or replacement | $500 to $2,500 | Only if rotted or delaminated sheathing is found |
| Flashing, ridge caps, trim, and fasteners | $1,800 to $3,600 | $1 to $2 per sq ft; clip systems cost more |
| Labor (installation crew) | $3,600 to $7,200 | $2 to $4 per sq ft |
| Permits and inspections | $250 to $600 | City of Orlando building permit + county inspection |
| Estimated total | $14,500 to $38,000 | Most common range: $22,000 to $28,000 |
Those numbers assume a straightforward single-story home with a walkable pitch. A two-story house with a steep roof or a complex hip-and-valley layout in neighborhoods like Thornton Park or Delaney Park will push labor higher, sometimes to $5 per square foot or more, because crews move slower and safety equipment becomes essential.
Standing Seam vs. Exposed-Fastener: What’s the Difference in Cost?
Standing seam metal roofs dominate the higher end of that range. The panels lock together with hidden fasteners, which means no screw holes exposed to Orlando’s rainy season. You’re paying $12 to $16 per square foot installed. Exposed-fastener panels, sometimes called agricultural or commercial-style panels, run $5 to $10 per square foot installed, but the screws have rubber washers that degrade under Florida UV exposure and need retightening or replacement every 8 to 12 years. A lot of Orlando homeowners who want the metal roof look without the standing seam price choose exposed-fastener for rear sections or detached structures, then use standing seam on the street-facing roof planes.
What Affects Metal Roof Installation Pricing in Orlando
Six factors move the price more than anything else in the Orlando market. Here’s what we see when we walk a roof and write an estimate:
- Roof pitch and complexity: A 4/12 pitch roof is fast to work on. A 10/12 or steeper roof requires harnesses, toe boards, and slower crews. Orlando homes built in the 1950s and 60s in areas like Colonialtown and Audubon Park often have steep gables that add $2 to $4 per square foot in labor. Roofs with multiple valleys, dormers, and skylights also cost more because every transition needs custom flashing.
- The old roof’s condition: Water-damaged decking hides under shingles all over Orlando, especially where hurricanes and afternoon thunderstorms have leaked under old flashing. If we find rotted sheathing or truss ends, that’s $500 to $2,500 added to the job. We always budget for this possibility in our written estimates, so the final number doesn’t surprise you.
- Metal gauge and brand: 26-gauge steel panels cost more than 29-gauge and hold up better to hail and impact from wind-blown debris. Brands like McElroy, Sheffield, and TriCounty Metals dominate the Central Florida supply chain, and their pricing shifts with steel markets. We install manufacturer-recognized brands and quote exact product names so you know what you’re buying.
- Underlayment spec: Florida building code requires a secondary water barrier under metal roofing, and the quality spread is real. Basic 30-lb felt runs about $0.20 per square foot, but high-temp synthetic underlayment rated for Florida’s attic heat runs $0.50 to $1 per square foot. That’s $900 to $1,800 on a typical Orlando roof. We spec synthetic on every metal install because the attic temperatures in summer here can exceed 140°F.
- Cool-roof coatings and color: Metal panels with PVDF (Kynar 500) coatings in ENERGY STAR certified colors cost $1 to $2 per square foot more than standard SMP finishes. In Orlando, the energy savings from a reflective roof are real, but the upfront premium matters to the budget.
- Access and landscaping: Tight lot lines, pool cages, and mature oaks over the roof, which are common in Winter Park and along the Conway chain of lakes, slow down material staging and add time. Scaffold setup for a roof over a screened pool enclosure can add $800 to $2,000 depending on the layout.
Metal Roof Costs vs. Asphalt Shingles in Orlando
An asphalt shingle roof on the same 1,800-square-foot Orlando home runs $9,000 to $14,000 installed. So metal costs roughly $8,000 to $16,000 more upfront. But the arithmetic changes over the life of the roof. Asphalt shingle roofs in Central Florida last 15 to 22 years before the sun and humidity break them down. A properly installed standing seam metal roof lasts 40 to 60 years in this climate, often with nothing more than an occasional inspection after a named storm passes through.
Homeowners in Orlando also pay attention to insurance. Many carriers in Florida now offer premium reductions for metal roofing that meets the Florida Building Code’s wind mitigation standards, particularly for wind uplift resistance. Some homeowners report $400 to $900 per year in premium savings after switching to a code-rated metal roof. That’s not a guarantee, and your carrier decides, but it’s worth asking about when you budget. And if you plan to stay in the house more than 12 to 15 years, metal typically comes out ahead on total cost.
How Much Does Metal Roof Installation Cost by Roof Size in Orlando?
Here’s a practical reference using common Orlando home sizes, assuming standing seam 26-gauge steel and a straightforward single-story roof:
- 1,200 sq ft roof (roughly a 1,000 to 1,300 sq ft home): $14,400 to $19,200
- 1,800 sq ft roof (typical 1,500 to 2,000 sq ft home): $21,600 to $28,800
- 2,500 sq ft roof (2,200 to 2,800 sq ft home): $30,000 to $40,000
- 3,500 sq ft roof (3,200+ sq ft home or low-pitch ranch): $42,000 to $56,000
These are ballpark figures. Your roof’s footprint is not your home’s square footage because of pitch and overhangs. A 2,000 sq ft home with a steep roof could have 3,000 sq ft of roof surface. That’s why we measure the actual roof, not the floor plan, when we write an estimate.
How to Save on Metal Roof Installation in Orlando
You can reduce the cost of a metal roof without cutting corners that will cost you later. Here’s what actually works in the Orlando market:
- Time the job for late fall or early winter: Orlando’s busy season for roofing runs from March through September, when afternoon thunderstorms and hurricane prep drive demand. Scheduling between November and February can get you better crew availability. Roofing companies don’t run seasonal sales, but crews book further out in peak months, and you may wait 3 to 6 weeks for installation. Off-season scheduling gets you on the calendar faster.
- Use exposed-fastener panels on less visible roof sections: If a standing seam roof on the full house stretches the budget too far, some homeowners put standing seam on the street-facing planes and exposed-fastener panels on rear sections the neighbors will never see. The cost difference can save $3,000 to $7,000 depending on layout.
- Fix decking issues yourself if you’re able: If your decking has minor rot in a couple of spots and you or a handyman can replace those sheets before we install the roof, you save the marked-up cost of repair. A sheet of 1/2-inch OSB costs about $30 to $40 at a local building supply, but we do not recommend roof work as a DIY project. Any work at height carries real fall risk. This tip only applies to accessible, low-slope sections.
- Ask about financing: Many Orlando metal roof projects are financed at rates between 7% and 12% over 5 to 20 years, depending on credit. A $25,000 roof financed over 15 years at 9% runs about $254 per month. That math makes metal reachable for homeowners who don’t have the full cash price sitting in a savings account.
- Compare total cost, not just the roof: The lowest bid in Orlando is sometimes a crew working without permits or using 29-gauge panels where 26-gauge is needed. Our written price always includes the permit, the inspection, and the exact product names. We’d rather you compare our number to anyone’s with the full scope in writing.
The best way to save, honestly, is to get a free estimate and know your number. Call (850) 757-3564 and we’ll measure your roof and give you a written price before any work starts. No email form, no callback in 48 hours. A live person answers the phone, 24/7.
Does Homeowners Insurance Cover Metal Roof Installation in Orlando?
In most cases, insurance covers roof replacement only when the existing roof was damaged by a covered peril like wind, hail, or a fallen tree. You won’t typically get a metal roof paid for by the insurance company unless your existing roof is metal and was damaged, or your policy specifically offers replacement cost coverage that allows you to upgrade. What is worth checking: Florida insurance premium discounts for impact-resistant and wind-mitigation-rated metal roofing. Many carriers offer lower premiums once a new metal roof with the proper underlayment and attachment system is installed. Your agent can run the numbers on your specific property before you commit.
What Is the Orlando Building Code Requirement for Metal Roofing?
The City of Orlando and Orange County both enforce the Florida Building Code, which requires a secondary water barrier beneath metal roofing (underlayment rated for the product), as well as wind-load calculations for the roof assembly based on your home’s location and exposure. In practical terms, that means we pull a permit for every metal roof installation, the underlayment is inspected before panels go on, and the final installation gets signed off by a county or city inspector. Any company quoting you a metal roof without a permit is quoting an illegal installation. Our written price always includes the permit and inspection fees, and we coordinate the inspection schedule so you don’t have to.
What to Look for in an Orlando Metal Roofing Contractor
The roof will outlast most of the cars you’ll ever own, so the installer matters more than the panel brand. Here’s what we recommend every Orlando homeowner check before signing a metal roof contract:
- Written price before work starts: If a contractor won’t put the number in writing before asking for a deposit, walk away. We give every homeowner a written price before any work begins, and the final invoice matches the estimate unless we find hidden damage, which we document and discuss with you first. We decide together before any change is made.
- Who’s coming to your door: This is the part most roofing companies ignore, and it’s the part we’ve built our business on. Before your appointment, Mercer Roofing sends you the name and photo of the technician who will knock on your door. When they arrive, they badge in with a photo ID. Every technician is background-checked and uniformed under the Threshold Verified standard, the quality framework each independently owned Threshold Group location is held to. If the person at your door doesn’t match the photo we sent, don’t open the door. That situation simply won’t happen with us.
- Warranty and guarantee in writing: Metal panel manufacturers offer their own material warranties, usually 25 to 50 years depending on the product and finish. Our workmanship is covered by the 365-Day Done Right Promise. If the installation isn’t right within a year, we make it right, and every repair we do includes a written guarantee. If a repair fails, the second visit is free.
- Specific product names: Ask for the exact brand, gauge, and finish. We install manufacturer-recognized metal systems and will name the product in your contract. Vague quotes like “premium metal” often mean thinner steel.
How Long Does Metal Roof Installation Take in Orlando?
Most single-family metal roof installations in Orlando take 3 to 7 days from tear-off through final inspection. An 1,800-square-foot roof that’s torn off on Monday is usually watertight and fully installed by Friday, with the county inspection scheduled the following week. Complex roofs with steep pitches, multiple valleys, or significant decking repair can stretch to 10 days. Weather is the variable. Afternoon thunderstorms from June through September can stop work for an hour or two, but a well-run crew plans around the radar and keeps the roof deck covered whenever rain threatens.
FAQs: Metal Roof Installation Cost in Orlando
Is a metal roof worth the extra cost in Florida?
Yes, for most Orlando homeowners who plan to stay in the house long-term. A standing seam metal roof costs $22,000 to $28,000 on a typical home, roughly double the cost of asphalt shingles, but it lasts 40 to 60 years in Central Florida’s climate, compared to 15 to 22 years for shingles. Add potential insurance premium reductions and lower cooling costs, and metal often breaks even at the 12 to 15 year mark. Call (850) 757-3564 and we’ll give you the real numbers for your specific roof.
How much does a metal roof cost per square foot in Orlando?
In the Orlando market, exposed-fastener metal panels run $5 to $10 per square foot installed, and standing seam runs $12 to $16 per square foot installed as of 2026. The lower end assumes a simple, low-pitch roof with no decking repair. For an exact per-square-foot number on your house, call (850) 757-3564 for a free written estimate.
Can I install a metal roof over my existing shingles in Orlando?
Yes, in some circumstances, and it saves $2,700 to $5,400 in teardown costs on a typical Orlando roof. The Florida Building Code allows metal roofing over a single layer of existing shingles if the structure can support the additional weight and the decking is sound. We inspect the existing roof and structural framing before recommending this route. Not every roof qualifies. The shingle layer underneath can trap moisture and hide deck rot, so we don’t recommend it unless the existing roof is in genuinely good condition.
How much does it cost to replace a metal roof in Orlando?
Replacing an existing metal roof runs $20,000 to $34,000 for a typical 1,800-square-foot Orlando home, which includes removing the old metal panels. The removal of the old metal costs about $1 to $2 per square foot more than shingle removal because metal panels are heavier and require more disposal. But some old roofs can be re-paneled without full removal depending on the existing roof system, which lowers the total. Call (850) 757-3564 and we’ll assess what your specific roof needs.
Do metal roofs lower home insurance in Orlando?
They can. Many Florida insurance carriers offer premium reductions for roofs that meet current wind mitigation standards, including code-rated metal roofing. The reported savings range from $400 to $900 per year on some Orlando policies, but your carrier and policy specifics determine what you’ll actually receive. Ask your agent to quote your policy with a new metal roof before you commit, and factor any savings into your budget.
Get a Written Price for Your Orlando Metal Roof
You want a number, not a sales pitch. We get that. Call Mercer Roofing Co Orlando at (850) 757-3564 and we’ll schedule a time to measure your roof and give you a written price before any work starts. No deposit required just to get the number. Before the appointment, you’ll receive the name and photo of the technician who will knock on your door. When they arrive, they’ll badge in with a photo ID. Every technician is background-checked, identity-verified, and uniformed under the Threshold Verified standard. You’ll know exactly who’s on your property, exactly what the roof costs, and exactly what the 365-Day Done Right Promise covers. That’s how roofing should work.
We install metal roofs across Orlando, Winter Park, Oviedo, Kissimmee, and the surrounding Orange County communities. Whether you’re in Lake Nona, College Park, Baldwin Park, or Dr. Phillips, the same written-price guarantee and badge-at-the-door standard applies. Grant Whitlock leads our Orlando team, and he answers to the same written guarantees we’ve held since 2000 as part of the Threshold Group family. Call (850) 757-3564 and get your free estimate today.
Written by Grant Whitlock, Owner at Mercer Roofing Co Orlando, serving Orlando and Orange County since 2000.
Pricing reflects the Orlando market as of 2026. Mercer Roofing Co Orlando offers free estimates. Call (850) 757-3564.
What Our Customers Say
"Detailed written quote with the shingle line and warranty spelled out. No surprises at the end."
- Laura B."Leak showed up in the hallway ceiling after a big storm. They found the failed pipe flashing in about ten minutes, replaced it, and checked the attic for wet insulation."
- Sophie R."Roofer showed his ID and gave me the crew lead's name before anyone climbed the ladder. Replaced a patch of missing shingles and resealed two vent boots. Written estimate matched the final bill."
- Brian J.