Tamko Roof Installation Nationwide

Tamko Roof Installation in Orlando: What to Know First

Tamko roof installation in Orlando typically runs between $8,500 and $14,200 for a standard single-family home, depending on the shingle line you choose and what’s happening under the old roof. We install Tamko Heritage, Heritage Proline, and Elite shingles as an independent Tamko service provider, and most full tear-off and replacement jobs take 2 to 4 working days once materials hit the driveway. The honest posture is this: we give you a written price before any work starts, and that number doesn’t change unless we find decking rot or code issues that genuinely need addressing.

Call (850) 757-3564

This page is for Orlando homeowners who already own a Tamko roof and need it replaced, or who are considering Tamko for a new install and want straight answers. If you’re dealing with a leak, granule loss, or storm damage and wondering whether to patch or replace, call (850) 757-3564. Grant Whitlock and our crew will tell you what’s actually up there.

How Tamko Products Fail – and How We Fix Them

• Heritage Series granule loss at the 8-12 year mark. In Orlando’s heat-and-downpour cycle, the asphalt in Heritage shingles oxidizes faster than cooler-climate roofs, and granules start washing into gutters. Homeowners often mistake this for “just an old roof” when it’s really the shingle reaching end of life. We check granule embedment depth during the estimate and tell you honestly whether you have 2 years or 2 months left.
• Heritage Proline sealant strip failure on west-facing slopes. The self-seal adhesive on Proline shingles can bake loose under direct Florida afternoon sun, especially on roof planes that face west with zero shade. When a wind gust hits, you get lifted tabs and exposed nail heads. Our fix is a full re-seal with manufacturer-spec adhesive during installation, or a targeted repair if the roof still has life in it.
• Elite series nail-line delamination after improper installs. Tamko’s laminated Elite shingles have a very specific nail zone, and when a previous contractor nailed outside it, the first big storm peels the top laminate layer clean off. We see this most often on homes in Lake Nona and Conway that were built during the 2004-2007 boom when crews were racing. Our installers follow Tamko’s nail-line diagram exactly, and we document it with photos before underlayment goes down.
• Hip and ridge cap cracking across all Tamko lines. The ridge caps take the worst of Orlando’s UV exposure because they sit at the highest angle to the sun. Tamko caps are solid products, but they crack when they’re nailed too tight or bent over a ridge that isn’t straight. We replace caps with a slight expansion gap and hand-seal each one, because the ridge is where leaks start quietly.
• Decking rot under Tamko roofs on older Orlando subdivisions. In neighborhoods like College Park and Winter Park, original plywood decking from the 1980s and 1990s doesn’t always survive 25 years of Florida humidity, even when the Tamko shingles above it still look okay. We inspect the decking from the attic side during every estimate, and if it’s soft, we tell you before pricing so there are no surprises on install day.

Our Tamko Roof Installation Process

1. 1
   Call and talk to a real person. You reach a live human at (850) 757-3564, 24/7, not a voicemail tree. We schedule an estimate at a time that works for you.
2. 2
   The written price before anything else. Grant or a senior tech inspects the roof, checks the attic, and puts a written price in your hand before a single shingle is ordered. That price covers labor, materials, dump fees, and any permit costs for Orlando or Orange County.
3. 3
   We order Tamko materials and confirm the line. Whether you’re replacing Heritage with Heritage, upgrading to Proline, or switching to Elite for the warranty, we confirm the exact shingle line, color, and accessory list with you before ordering.
4. 4
   Installation day: tear-off, decking check, full system build. We tear off the old roof, inspect and replace any rotted decking at our pre-agreed per-sheet price, then install new underlayment, drip edge, flashing, and Tamko shingles to manufacturer spec. Your technician’s name and photo are sent to you before they arrive, and they badge in with a photo ID at the door.
5. 5
   Final walk-through and documentation. We walk the roof with you from the ground, show you photos of the finished work, and confirm cleanup is complete. You get a written 365-day Done Right Promise on the workmanship, plus Tamko’s manufacturer warranty on materials.
6. 6
   If anything’s off, we come back. If the work isn’t right within a year, we make it right. That’s the guarantee, in writing, on every Tamko install we do.

What Tamko Roof Installation Costs in Orlando

What moves the price: roof pitch (a 10/12 pitch adds labor cost), number of stories, how much decking needs replacing, and whether you’re in an HOA with specific color or material requirements. Permit fees in Orlando and Orange County are included in our written quote. Call (850) 757-3564 for an exact number on your house, not a ballpark.

Why Orlando Homeowners Call Mercer Roofing Co Orlando for Tamko Work

Because the person who shows up at your door is someone you already know. Before every visit, we send the technician’s name and photo, and they present a photo ID badge when they arrive. That’s the Threshold Standard, and every Mercer Roofing Co Orlando technician is background-checked, identity-verified, and held to it. We’re part of the Threshold Group family, founded in 2000, and each location is independently owned and operated under that same standard.

Beyond the door, it’s about knowing Tamko. We install Tamko products regularly, and we also work with GAF, Owens Corning, and CertainTeed, so we’re not steering you toward one brand because we’re stuck on it. We’re steering you toward the right roof for a Florida climate. Every project gets the 365-Day Done Right Promise in writing, and a free second visit if anything we touch fails within that year.

FAQs