A Mercer company - serving Orlando, FL

Tamko Roofing Company Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Tamko Roofing Company in Orlando: What to Know First

Tamko roofing repair and replacement in Orlando typically runs between $450 and $1,800 for targeted repairs, while full tear-off and re-roof jobs on Tamko shingle homes generally land between $9,500 and $18,000 depending on square footage, pitch, and decking condition. Most Tamko repair jobs we schedule are completed within one to three days of the initial inspection, and we never start work without a written price in your hand first. If you’re a Tamko homeowner in Orlando wondering whether that lifted shingle edge or granule-heavy gutter is a small fix or a sign of something bigger, call (850) 757-3564 and we’ll walk you through what’s actually up there.

Roofers using a conveyor lift to install shingles on a house roof nationwide

Call (850) 757-3564

This page is for homeowners in Orlando who bought a home with Tamko shingles already on it, or who had Tamko installed years ago and now need straight answers about repair versus replacement. Grant Whitlock and the crew at Mercer Roofing Co Orlando have repaired enough Tamko roofs across Orange County to know exactly where these shingles tend to struggle in Florida’s climate, and we’ll tell you the truth even when the truth is “you’ve got a few years left.”

How Tamko Products Fail – and How We Fix Them

Tamko makes a solid shingle. Heritage, its most common architectural line, shows up on thousands of Orlando roofs. But every shingle brand has failure patterns, and Tamko is no exception. Here’s what we see most often on Tamko roofs in Central Florida, and what we do about it.

  • Heritage 30 granule loss at the sealant strip. Tamko’s Heritage line uses a fiberglass mat with a thick asphalt coating, but after years of Orlando’s UV intensity, the granules near the shingle’s sealant line can loosen and shed. You’ll see dark patches where the asphalt is exposed. We fix this by replacing the affected shingles before the mat itself starts to dry out and crack, which is the point where water gets through.
  • Heritage II wind-lift along the eaves. Tamko’s Heritage II series is a heavier shingle rated for higher wind, but we still get calls after summer squalls where a few shingles at the eave line have lifted. The cause is usually not the shingle itself but the nail pattern from the original install: nails placed too high or driven at an angle. We lift the shingle, re-nail it in the correct flat zone, and re-seal it. It’s a small job that prevents a much larger one.
  • Elite Glass-Seal cracking at the bend point. Tamko’s Elite Glass-Seal is a three-tab line we see on older Orlando homes, and its known weak point is the tab-to-tab cutout where the shingle flexes. Over years of heat cycling, that bend point can develop hairline cracks that are nearly invisible from the ground. We find them on hands-and-knees inspections, and we replace them early because a cracked tab is a water entry point waiting for the next afternoon downpour.
  • MetalWorks stone-coat fade and sealant wear on ridge caps. Tamko’s MetalWorks line is a stone-coated steel product popular on some Orlando custom homes, and while it holds up well against wind, the stone coating can fade unevenly on south-facing slopes, and the ridge cap sealant deteriorates faster than the panels themselves. We re-seal ridge caps and replace individual panels rather than pushing a full re-roof when the underlying metal is still sound.
  • Decking rot hidden under Tamko shingles near box vents. This one isn’t Tamko’s fault, but it shows up on Tamko roofs constantly: water intrusion around plumbing vents and attic box vents that rots the OSB decking underneath. Shingles can look fine while the decking underneath is turning soft. When we do a Tamko repair, we always probe the decking around penetrations. If it’s spongy, we replace that section before it spreads.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our Tamko Roofing Company Process

  1. 1
    You call, a real person answers. Not a voicemail tree. You describe what you’re seeing, and we schedule a visit. We’ll send you the technician’s name and photo before they arrive so you know exactly who’s at your door.
  2. 2
    The technician badges in. Uniformed, photo ID shown before stepping onto your property. Then we inspect the roof, your attic if accessible, and the areas around vents, flashing, and valleys, looking for the specific Tamko failure patterns we know from this climate.
  3. 3
    You get a written diagnosis and a written price. Before anything is touched, you’ll see the number in writing. We’ll tell you which Tamko shingles need replacing, whether we can match the color and lot, and whether aftermarket underlayment or flashing parts are equal to or better than what’s up there.
  4. 4
    We make the repair. Matching Tamko shingles when we can source them, quality aftermarket equivalents when Tamko has discontinued the color or line. We pull nails properly, re-seal with the right adhesive, and replace any compromised flashing, vent boots, or underlayment sections as we go.
  5. 5
    We test, document, and hand you the guarantee. Water test on the repaired area, photos of the work, and a written 365-day guarantee on the repair. If that repair fails within the year, you get a second visit free.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Tamko Roofing Company Costs in Orlando

Tamko Service Typical Orlando Price Range
Shingle replacement, 3-10 shingles (Heritage, Heritage II) $450 – $850
Vent boot replacement with decking patch $400 – $700
Ridge cap re-seal and shingle replacement $600 – $1,100
Flashing repair around chimney or skylight $700 – $1,500
Full tear-off and re-roof with Tamko Heritage $9,500 – $18,000

What moves the number: roof pitch (a 7/12 or steeper roof is slower, more dangerous work), single-story versus two-story, how much decking has to be replaced, and whether your Tamko color has been discontinued making it harder to source a match. We’ll never pad an estimate, and we’ll never change the price once work starts unless we find rotted decking or structural damage we couldn’t see before opening things up, in which case we’ll stop and show you what we found before proceeding. Call (850) 757-3564 to schedule a free estimate and get a real number for your roof.

Why Orlando Homeowners Call Mercer Roofing Co Orlando for Tamko Work

Grant Whitlock has worked on a lot of Tamko roofs in this market, including plenty of homes around Lake Nona where standing water after a summer storm pushes into places homeowners never think to look until there’s a stain on the ceiling. But the reason people keep calling us isn’t just the repair work. It’s that we send you the technician’s name and photo before they show up, they badge in with photo ID at the door, and every price is in writing before a single nail gets driven. Our 365-Day Done Right Promise means if the repair isn’t right within a year, we’re back to make it right, no charge. And because we also work with GAF, Owens Corning, and CertainTeed shingles daily, we can tell you honestly whether a Tamko repair makes sense or whether a different material fits your roof’s next chapter better. We’re an independent Tamko service provider, not a manufacturer-authorized dealer, which means our loyalty is to you and your roof, not to a brand directive.

Roofers using a conveyor lift to install shingles on a house roof nationwide

FAQs

Need Roofing help in Orlando? Licensed & insured · Free written quotes response · free estimates
Call (850) 757-3564
Local Service Coverage

Request a Free Estimate in Orlando

Tell us what you need - Mercer Roofing Co Orlando responds fast. No obligation.

By clicking submit, you confirm you have read our Privacy Policy and consent to being contacted through phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Us
Call Now - 24/7 Dispatch